Made In AmericaRD Series Datasheet
Tang
No Tang
Rod Ends
Mountings
Numbering
RD Series Dimensions
Double Acting No Tang
Double Acting Double Ended
RD Series Rod Ends
RD Series Mountings
Clevis Bracket
|
BASE MODEL |
PART NO. |
E | F | R | CB | CD | DD | FL |
| RD150 | M-9107 | 3 | 5/16 | 2-1/4 | 1/2 | 5/16 | 1/4 | 1-3/4 |
| RD200 | M-9107 | 3 | 5/16 | 2-1/4 | 1/2 | 5/16 | 1/4 | 1-3/4 |
| RD250 | M-9108 | 4 | 3/8 | 3 | 5/8 | 7/16 | 3/8 | 2-3/8 |
| RD300 | M-9108 | 4 | 3/8 | 3 | 5/8 | 7/16 | 3/8 | 2-3/8 |
| RD400 | M-9109 | 5 | 7/16 | 3-3/4 | 3/4 | 1/2 | 7/16 | 3 |
Flange
|
BASE MODEL |
PART NO. |
E | R | T | DD | FF |
| RD150 | M-9110 | 3-1/4 | 2-1/2 | 19/32 | 1/4 | 5/16 |
| RD200 | M-9110 | 3-1/4 | 2-1/2 | 19/32 | 1/4 | 5/16 |
| RD250 | M-9111 | 4-1/2 | 3-3/8 | 23/32 | 3/8 | 3/8 |
| RD300 | M-9111 | 4-1/2 | 3-3/8 | 23/32 | 3/8 | 3/8 |
| RD400 | M-9112 | 5-1/2 | 4 | 23/32 | 7/16 | 7/16 |
Nut
|
BASE MODEL |
PART NO. |
B | C | D |
| RD150 | M-9100 | 1-7/16 | 15/32 | 1-3/4 |
| RD200 | M-9100 | 1-7/16 | 15/32 | 1-3/4 |
| RD250 | M-9101 | 2-1/16 | 25/32 | 2-7/16 |
| RD300 | M-9101 | 2-1/16 | 25/32 | 2-7/16 |
| RD400 | M-9102 | 2-1/2 | 15/32 | 2-15/16 |
Rod Clevis and Pin
|
BASE MODEL |
PART NO. |
A | L | CA | CB | CC | CD | CE | CW |
| RD150 | M-9103 | 1 | 11/16 | 2-1/4 | 3/8 | 1/2-13 | 5/16 | 1-3/4 | 1 |
| RD200 | M-9104 | 1 | 11/16 | 2-1/4 | 3/8 | 5/8-11 | 5/16 | 1-3/4 | 1 |
| RD250 | M-9105 | 1 | 27/32 | 2-5/8 | 1/2 | 3/4-10 | 7/16 | 2-5/64 | 1-1/8 |
| RD300 | M-9105 | 1 | 27/32 | 2-5/8 | 1/2 | 3/4-10 | 7/16 | 2-5/64 | 1-1/8 |
| RD400 | M-9106 | 1 | 1-1/32 | 3-1/16 | 11/16 | 1-8 | 5/8 | 2-25/64 | 1-1/2 |
RD Series Part Number Description
For example, a 10" stroke 4.0" bore cylinder with a single end, standard rod end, nose mounting and Viton seals would be: RD N 400 SE SL10 RA1 VS
| General Description | Specific Information | CODE | RD | P | 400 | SE | SL1 | RA1 | FC,RC | |
| SERIES | RD Series Cylinder | RD | ||||||||
| MOUNTING | PIVOT MOUNT | P | ||||||||
| NOSE MOUNT | N | |||||||||
| BORE SIZE | 1.5" | 150 | ||||||||
| 2.0" | 200 | |||||||||
| 2.5" | 250 | |||||||||
| 3.25" | 325 | |||||||||
| 4.0" | 400 | |||||||||
| END STYLE | SINGLE END | SE | ||||||||
| DOUBLE END | DE | |||||||||
| STROKE | SPECIFY STROKE LENGTH (IN DECIMALS) | SL | ||||||||
| ROD END STYLE | SINGLE END | |||||||||
| FULL MALE THREAD "A" END (STANDARD) | RA1 | |||||||||
| DOUBLE END (SUPPLY BOTH FOR DE) | ||||||||||
| FULL MALE THREAD "D" END | RD1 | |||||||||
| CONSULT FACTORY ON VARIATIONS | RD3 | |||||||||
| FRONT (HEAD) CUSHION | FC | |||||||||
| REAR (CAP) CUSHION | RC | |||||||||
| ROD CLEVIS & PIN (FACTORY INSTALLED) | MF | |||||||||
| CLEVIS PIN AND RETAINERS | MZ | |||||||||
| CLEVIS BRACKET AND PIN (FACTORY ASSEMBLED) | MG | |||||||||
| NOSE MOUNT NUT | NM | |||||||||
| MAGNETIC PISTON | SP | |||||||||
| DOUBLE U-CUP DESIGN | MT | |||||||||
| STAINLESS STEEL ROD | SS | |||||||||
| METALLIC ROD WIPER | MW | |||||||||
| VITON SEALS | VS | |||||||||
| STOP TUBE (SPECIFY LENGTH) | ST | |||||||||
| ROD MODIFICATION (INCLUDE DETAILS) | RM | |||||||||
| SPELL OUT ALL OTHER MODIFICATIONS NOT LISTED IN DETAIL (INCLUDE DRAWINGS IF POSSIBLE) | ||||||||||
Download RD-Series Datasheet © 2000 - 2012 Motion Controls LLC. All rights reserved. Terms of Use